Members flyingpumpkin Posted May 29 Members Report Posted May 29 (edited) I have a reliable barracuda 200zw (similar to a sailrite 200zw) It has a flat asymmetric pin connector for a classic foot pedal/ac power connection to the external machine-mounted motor. I am designing my own replacement speed controller and want to use the existing connector. I know I can buy a wired pedal and cut it but for ease of experimentation I was hoping to connect wires to a banana style or pin jack. To plug into the existing motor Lowe without cutting wires. I don’t know the size of the pins/sockeys. AI says try 2.8mm and then 1.5mm but I’m not convinced it’s right about anything. Im not near the machine. photo of the typical connector foot controller (female connector) https://a.co/d/fpXFvPf machine side connection:Socket connection (male pin) https://a.aliexpress.com/_mtRUCn9 Edited May 29 by flyingpumpkin Added info Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.