Jump to content

Recommended Posts

  • Members
Posted

I am looking for a landis 3 loop thrower. The little finger with a hole in it that moves the thread in front of the needle. I have tried the landis number for a few months but I'm not getting an answer. I thought I would see if anyone has one before attempting to make one out of a 5/32 aircraft drill bit.

  • Members
Posted (edited)

I think the Campbell one might interchange, if you change out the holder for it. I think it was all one "L" shaped piece on Randall's and Landis 3's, but the new 2 piece Campbell style interchanges with the Randall at least, and it gives a little more adjustment to get the eye just where you want it.

CHS-602 for the thread eye which is straight with a little bend on the eye end and is .124" diameter.

And CHS-593A for the holder which is .186 diameter on the vertical end, if you want to check it.

20250620_154025.jpg.51fd4b75e5dfa0c9ea330ce6bb7a663c.jpg

Edited by mbnaegle
  • Members
Posted

That is helpful information. Thanks 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...