Neat idea - more light to sew by

[MikeG]

While servicing my Juki, I noticed the underside of the body is flat and free of any oil holes or other objects.  As an experiment, I installed a 6 inch self adhesive strip of LEDs and a 12 volt wall wart.  The difference in visibility is amazing.  

[Tommy217xxx]

21 minutes ago, MikeG said:

While servicing my Juki, I noticed the underside of the body is flat and free of any oil holes or other objects.  As an experiment, I installed a 6 inch self adhesive strip of LEDs and a 12 volt wall wart.  The difference in visibility is amazing.  

That’s a great idea. What LEDs did u use?

[MikeG]

I had a roll of 12V warm white LEDs from superbrightleds.com that were left over from under cabinet lights in the kitchen.  I just cut off 6 inches & connected to a 12v power supply I had in the parts bin.  Amazon has six inch sections of LED strip also.  If I was purchasing new I would probably get daylight instead of the warm white.