Paddle holster question

[DoubleKCustomLeathercraft]

I got a call today for a paddle holster. I'm familiar with these, the paddle rides inside the pants instead of using a loop or clip. 

Is there anyone here that has any experience making a leather paddle? Do I just stitch leather onto a kydex or plastic paddle? Or do I use just leather, maybe skirting, and hardening it? 

I'll do some research on my own, but this is my first stop. I'd rather hear from someone that's done it than just looking at pictures and trying to guess

Thanks

[wizard of tragacanth]

Never done it but I would start here... https://www.holstersmith.com/vcom/advanced_search_result.php?keywords=paddle

Does this one give you any ideas? https://www.holstersmith.com/vcom/paddle-mount-blade-tech-attachment-hardware-p-2089.html 

If I were attempting this, I would use Weldwood contact cement to put a layer of thin leather over the surface that would contact one's skin... maybe.

Edited 4 hours ago by wizard of tragacanth

[DoubleKCustomLeathercraft]

1 hour ago, wizard of tragacanth said:

Never done it but I would start here... https://www.holstersmith.com/vcom/advanced_search_result.php?keywords=paddle

Does this one give you any ideas? https://www.holstersmith.com/vcom/paddle-mount-blade-tech-attachment-hardware-p-2089.html 

If I were attempting this, I would use Weldwood contact cement to put a layer of thin leather over the surface that would contact one's skin... maybe.

Holstersmith is a go too for blue guns. I did look at the paddles there, but I'm thinking if using 24ga galv steel in between leather. The client is looking for a leather paddle, and using the plastic paddles would make it way too thick. There are a couple posts I found in the archives here that explain how to do so, and it sounded like a good place to start. They're old posts. Appreciate the response. I'm still interested if there are any other ideas out there, but the metal reinforcement for the holster and paddle make sense