Members karl Posted March 3, 2009 Author Members Report Posted March 3, 2009 (edited) JoeThat is what I have done. I have not notice it dulling my knives. RussH Fellas, I just cut out a piece of the 1/4inch foam I have used to pad saddle seats and cut it a little over size and push it down in there and watch it so it doesn't turn sideways and the blade sets on the foam padding. Karl Edited March 3, 2009 by karl Quote
Members karl Posted March 4, 2009 Author Members Report Posted March 4, 2009 David, Thanks for the offer, but I think I'll keep it, I bought that a long time ago when Tandy was selling them an also have 3 of the Al Stohlman swivel knives, and as you look at the stand I made, the 2nd, 3rd, 4th and 5th swivel knives I have written on the wooden holder what they are. The 1st swivel knife, I bought on Ebay (no name on it) but its 5/8's inch diameter like the tandy one next to iy.Th 1st one has a C and a straight line to represent it is a ceramic blade and a straight blade. the next 4 swivel knives, #2, #3, #4, & #5 all have an "R" on them and designate that they are Ruby tipped blades and wheather they are straight or angle blades, and #6 is a Ceramic angle blade and #7 is labeled BB an is a stainless steel beader blade and #8 is an old tandy swivel knife that I made a home made combination undercut/beveler that comes in handy, But thanks for the offer any how. Karl Hey David, Here is where I have my swivelknife stand setting on my work bench. There are some more pictures in the Leather Conversation section. Karl Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.