UKRay Report post Posted June 3, 2009 I am using a British United Shoe Machinery rotary punch to make the holes for lacing projects but I only have one size of punch - it came with the machine. Does anyone have a source for these? Ray Quote Share this post Link to post Share on other sites
TTcustom Report post Posted August 12, 2009 (edited) I am using a British United Shoe Machinery rotary punch to make the holes for lacing projects but I only have one size of punch - it came with the machine. Does anyone have a source for these? Ray Ray since they have gone bust getting anything new is not possible. Have you looked on Ebay and the like? I am assuming you are in the UK. If there is a small job shop machine shop they might be happy to make what you need. POst a picture of the punch that came with your machine so I can see if it is a easy enough job to turn out what you require. Edited August 12, 2009 by TTcustom Quote Share this post Link to post Share on other sites
tat2 Report post Posted April 25, 2011 I sent a P.M to you. Contact www.seick.de he can either mill down 1mm so his punches fit into the 11mm shaft or make you some. Decent person. I just bought a BUSM too and once I have the machine I was going to sent the existing punch to him. Dan at Campbell randall I think can also make an adapter for the R-74 punches. How do you like the BUSM hole punch? Easy to operate and adjust? Quote Share this post Link to post Share on other sites