Jump to content

Recommended Posts

Posted

Whinewine,

that is about the same shape as my seat that I want to do. So you cut the top of the seat shape out then stiched it back in and after you wet it and form it? do you also rivet it to the bottom while still wet?

  • Contributing Member
Posted

Nice job! That looks like a tough first effort. Everything will be easy after that one...lol

  • Members
Posted (edited)
Whinewine,

that is about the same shape as my seat that I want to do. So you cut the top of the seat shape out then stiched it back in and after you wet it and form it? do you also rivet it to the bottom while still wet?

Murse:

The top is 6-7 oz, the gusset is 3-4 oz (a heck of a lot easier to wetform 3-4 than 6-7= this is why the lighter weight is used). The top is slightly larger than the gusset (by about 3/8") & the gusset is slightly smaller (by about 3/8") than the top. In effect, they overlap, for strength. I ended up gluing on the overlap. First set of holes are punched into the overlap (2 thicknesses, 6/7 + 3/4); second set of holes are only into the 3-4... & yes, the rivets are done while still wet (I stapled just for a temporary hold, then drilled & riveted, then removed the staples after the seat dried.

I hope this helps.

russ

rdb: thank you. It was a tough effort till I finally decided that it was down to the wire & I needed to get it done & I didn't want to buy him another seat after I ripped off the old plastic...

The man for whom I made this promised to take pics of it on his bike for me, but so far I haven't seen any (hey, he owns a camera store!!!).

Edited by whinewine

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...