Relocation of the hand wheel.

[tgidry]

I am thinking about moving the hand wheel from the end of the machine to the side so I don't have to reach too far. I'm curious as to what is involved and will I have to adjust the timing after doing this. I have no problems doing this and I have the tools but just wondering what is involved.

Thanks

Tucker

[tonyc1]

I am thinking about moving the hand wheel from the end of the machine to the side so I don't have to reach too far. I'm curious as to what is involved and will I have to adjust the timing after doing this. I have no problems doing this and I have the tools but just wondering what is involved.

Thanks

Tucker

Just undo the screw and move it,. There will be no problems.

Tony.

[tgidry]

Just undo the screw and move it,. There will be no problems.

Tony.

I wish it were that simple but there is only a plate where the wheel will go. There is no mounting shaft or gears so I need to get the parts for the relocation. Here a picture of the machine and you can see what I am talking about

.

Edited January 13, 2010 by tgidry