Members tgidry Posted January 13, 2010 Members Report Posted January 13, 2010 I am thinking about moving the hand wheel from the end of the machine to the side so I don't have to reach too far. I'm curious as to what is involved and will I have to adjust the timing after doing this. I have no problems doing this and I have the tools but just wondering what is involved. Thanks Tucker Quote
Members tonyc1 Posted January 13, 2010 Members Report Posted January 13, 2010 I am thinking about moving the hand wheel from the end of the machine to the side so I don't have to reach too far. I'm curious as to what is involved and will I have to adjust the timing after doing this. I have no problems doing this and I have the tools but just wondering what is involved. Thanks Tucker Just undo the screw and move it,. There will be no problems. Tony. Quote
Members tgidry Posted January 13, 2010 Author Members Report Posted January 13, 2010 (edited) Just undo the screw and move it,. There will be no problems. Tony. I wish it were that simple but there is only a plate where the wheel will go. There is no mounting shaft or gears so I need to get the parts for the relocation. Here a picture of the machine and you can see what I am talking about . Edited January 13, 2010 by tgidry Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.