Junker&ruh sd28 ( thread running ? )

[easy]

Is there anybody who can tel or show me , how the thread runs - (bobbin and needle)

i saw a lot of pics , but no one shows me how to start sewing

i became this one from a retired shoemaker

thanx and grtz ron ( netherlands)

[Art]

The person you want is Henry Veenhoven of Toronto, Canada. He has forgotten more about that machine then the rest of us know.

veenhoven@sympatico.ca

416-231-1870

Art

Is there anybody who can tel or show me , how the thread runs - (bobbin and needle)

i saw a lot of pics , but no one shows me how to start sewing

i became this one from a retired shoemaker

thanx and grtz ron ( netherlands)

[amuckart]

Here's an upper-thread threading digram from the Pedersen #308 (which was a J&R clone) manual:

Note the thread going through the wax pot. These machines are designed to use liquid stitching wax on the upper thread and pitched thread on the spool. If you use modern nylon thread in them you'll cut grooves in the thread path and the tension springs, which will eventually ruin the machine. You could probably use prewaxed cotton or linen in them Ok, but I haven't yet gotten thread samples of good thread for mine.

Here's the bobbin threading instructions:

I hope that helps.

[easy]

Here's an upper-thread threading digram from the Pedersen #308 (which was a J&R clone) manual:

Note the thread going through the wax pot. These machines are designed to use liquid stitching wax on the upper thread and pitched thread on the spool. If you use modern nylon thread in them you'll cut grooves in the thread path and the tension springs, which will eventually ruin the machine. You could probably use prewaxed cotton or linen in them Ok, but I haven't yet gotten thread samples of good thread for mine.

Here's the bobbin threading instructions:

I hope that helps.

thanks , i figured out myself , and now i,m seeing that i dit it wel , de machine works great