Members bigo5552000 Posted May 30, 2010 Members Report Posted May 30, 2010 Here are the last two holsters and one mag holster I have made! what do you think?? If you have any questions feel free to ask. looking for feedback please! Quote
Members bigo5552000 Posted May 31, 2010 Author Members Report Posted May 31, 2010 opinions please!!! Quote
Members Tac Posted June 2, 2010 Members Report Posted June 2, 2010 I like the "New York Reload" shoulder holster... Very cool design. Your XD compact holster looks clean. It could use a little more time working on the edges. I usually burnish mine with a peice of heavy canvas cut from an old pair of pants. The design also looks a little narrow to me. If you extended out the belt slots away from the holster pouch by about a half an inch or so in each direction, it would help the holster carry the weight of the gun and not cause such an agressive bend in the belt slot "wings" (specifically the rear/trailing slot). The mag pouch looks like it was a drawn/patterned for a longer magazine. Again, without be too critical, if you made it a little wider on both sides of the belt slots and a little shorter, it would be just about perfect. I use a heavy belt to carry my pistols/mags on and with the tight bends required to threat through your belt slots, I seriously doubt I could get either of them on to my belt.... Just my thoughts... -Tac Quote
Members bigo5552000 Posted June 3, 2010 Author Members Report Posted June 3, 2010 I like the "New York Reload" shoulder holster... Very cool design. Your XD compact holster looks clean. It could use a little more time working on the edges. I usually burnish mine with a peice of heavy canvas cut from an old pair of pants. The design also looks a little narrow to me. If you extended out the belt slots away from the holster pouch by about a half an inch or so in each direction, it would help the holster carry the weight of the gun and not cause such an agressive bend in the belt slot "wings" (specifically the rear/trailing slot). The mag pouch looks like it was a drawn/patterned for a longer magazine. Again, without be too critical, if you made it a little wider on both sides of the belt slots and a little shorter, it would be just about perfect. I use a heavy belt to carry my pistols/mags on and with the tight bends required to threat through your belt slots, I seriously doubt I could get either of them on to my belt.... Just my thoughts... -Tac Thanks for the comments! sliding the belt loops out is a good idea especially for the mag pouch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.