Mini-30 Stock Wrap / Cheek Pad

[TN leather]

Well I am not really sure I am ready for prime time but here goes.....

I have only been working at leather work a few months in my spare time so I am happy with the results.

This is a stock wrap with a magzine pouch and cheek pad. I figured since I may want to use a smaller magzine if hunting or take the cheek pad off when using no scope, then I would make it modular. I used industral stregnth velcro and sewed it on for extra hold. (a great way to gum up needles in case you have any you want to waste. live and learn) The flash makes the finish look bad but it is not nearly so ruff in person.

Body and tops of the attachments is 4-5oz and the backing for the cheek rest and mag pouch is 8-10 oz. (I just had it laying around.)

Edited November 25, 2010 by TN leather

[moeg]

Looks good and it's a great idea. Does the whole setup add any significant weight?

Moe.

[dirtclod]

You might want to check with a game warden if you haven't already about the size magazine you can have to hunt with. In Kentucky it's a five round magazine i think and i figure that's close to the limit nation wide. But i could be very wrong.

[TN leather]

moe

Not a real weight change. the mini is front heavy anyway so it blances it out some when the mags are loaded.

Dritclod

You are correct. The reason I made it so you could remove the mag pouch is so I could put a 5 round mag pouch there when hunting (not sure this is my first choice for hunting but it does not make a bad brush gun.)