Members akasarin Posted January 3, 2011 Members Report Posted January 3, 2011 I am going to be doing a seat for my bike, That will be tooled, but i plan on molding it to the contours of my seat pan. Should I mold to the contour first and try tooling on the irregular contour or tool flat then mold the seat? When the leather is wetted for molding will it wash out the tooling at all? Thanks Quote
JRodz Posted January 4, 2011 Report Posted January 4, 2011 I've never done a seat, but I have done a few molded cases and sheaths and I always carved first then molded. The leather would be to hard to carve after wet molding and pressing. It may not be necessary to say, but you may need to adjust your design to work with the contour of the seat after molding. I've seen some really cool molded stuff from some of the people who post here and hope they chime in with more help. Good luck. Quote Jose Rodriguez SoCal Leather Co.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.