Members The Farmers Daughter Posted March 17, 2011 Members Report Posted March 17, 2011 I pulled the old mans saddle out of storage today. Yikes what a mess! Its a rough out saddle and....no....wait a sec....to be more accurate, its a mold saddle with rough out. Parts are going technicolor. How can I clean it? Thank you! Quote
Members The Farmers Daughter Posted March 17, 2011 Author Members Report Posted March 17, 2011 REALLY? Nobody? Thought you folks dealt with leather everyday.... I pulled the old mans saddle out of storage today. Yikes what a mess! Its a rough out saddle and....no....wait a sec....to be more accurate, its a mold saddle with rough out. Parts are going technicolor. How can I clean it? Thank you! Quote
Members Kevin Posted March 17, 2011 Members Report Posted March 17, 2011 We use ammonia and water, as strong as you can stand it. I've also tried alcohol, but it always comes back in a humid climate. This has been discussed on here before and I don't think anyone had a permanant cure, once it's in the leather, it's pretty much there. Good luck, Kevin Quote
Members ChuckBurrows Posted March 18, 2011 Members Report Posted March 18, 2011 Plain old white vinegar full strength will 99% of the time kill and clean mold - wipe it on and lte dry then using a stiff natural bristle brush scrub down the leather to remove the dried mold. Re-apply/re-do if necessary and then condition the leather per normal Quote
Members TroyWest Posted March 18, 2011 Members Report Posted March 18, 2011 We've found that a product from Bee Natural leather Care called Rudy's is very effective at removing mold and mildew from saddles. We use it all the time. Quote
Members Saddlebag Posted March 19, 2011 Members Report Posted March 19, 2011 (edited) Vinegar would be my first choice only I'd use a spray bottle and wear a mask. Best done outside or well ventilated area. When dry you might want to try vacuuming if your's has a hose and small brush. I've had good luck picking up the nap by brushing the edge of a dry-as-a-board cellulose sponge. It sure won't cause any damage. Do we get a pic or two before you start? Edited March 19, 2011 by Saddlebag Quote
Members The Farmers Daughter Posted March 19, 2011 Author Members Report Posted March 19, 2011 (edited) Vinegar would be my first choice only I'd use a spray bottle and wear a mask. Best done outside or well ventilated area. When dry you might want to try vacuuming if your's has a hose and small brush. I've had good luck picking up the nap by brushing the edge of a dry-as-a-board cellulose sponge. It sure won't cause any damage. Do we get a pic or two before you start? I started the project before I saw your post, but here is what it looks like right now. Its had one application of vinegar spray and is out in the breeze. For some reason, I can't seem to upload more than 2 photos. I keep getting an error message. Will keep trying. Its an old Wyeth. Edited March 19, 2011 by The Farmers Daughter Quote
Members Saddlebag Posted April 3, 2011 Members Report Posted April 3, 2011 Nice to see the workmanship in the seat, the beautiful diamond pattern. The design in the seat often denotes the quality of the saddle. Quote
Members horsewreck Posted April 19, 2011 Members Report Posted April 19, 2011 I too use Bee Natural's RUDY'S, it is a natural product that I have used for years here in our shop. I also like Montana Pitch Blend oil and dressing, it has pine pitch in it. We buy Rudy's and MPB products by the case our customers like them as well for treating mold. I don't like using harsh products and home remedys on good leather........... Jeff Quote
dirtclod Posted April 19, 2011 Report Posted April 19, 2011 the reason your probley having trouble with your pictures is that their so big. If you resize them i bet you can load more than two at a time. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.