LonnieChambers Report post Posted May 2, 2011 (edited) Hello there. I have just got this seet in. Woundering if anyone would have some good ideas to make it better. Where my sturup leathers goo threw I use a peice of leather that is about 13 to 14oz . The tin strainer was pounded out on a anvil. it is 22gaug tin. After the tin is in I add a peice that is a big triange. Then the last peice covers the whole seat. I skive and shape every peice that goes in. To try to keep the riders but close to the tree and keep the saddle narrow where your legs would go. After I have finished all of my skiving. I cutt my hand hole, and then fold my tin leather threw the hand hole and glue down. I also skive the leather that was pulled threw the hand hole down so there is a smoth transition in to the seet. I will post a picture of my fiished ground seat. Well that is all for right now. Thanks Lonnie Chambers Edited May 2, 2011 by LonnieChambers Quote Share this post Link to post Share on other sites
