Tippman French Box Stich Attachment

[Kieran]

Can anyone help me I am looking for the french box attachment for a tipman boss sewing machine. Has anyone got one they dont want and are prepaired to sell. I live in London England.

Kind regards

Kieran

[celticleather]

Can anyone help me I am looking for the french box attachment for a tipman boss sewing machine. Has anyone got one they dont want and are prepaired to sell. I live in London England.

Kind regards

Kieran

I think you will be wasting your time and money! I've seen a post from Tippmann somewhere in which they admitted that the French box stitching attachment was not a successful accessory, and for this reason it has been dropped from their range.

[bruce johnson]

Yep, it took two hands to hold whatever ever you were sewing in the sewing attachment and you used your third arm to crank the handle to make the stitch.

[busted]

I use a piece of 2x4 pine for corner stitching. Cut two 45 degree corners on the two inch side of the 2x4. Leave 1/2" between the 45 degree angles. The piece I use is 24 inches in length clamp it to the work bench or bolt it down and start sewing French corners

2x4.bmp

Edited August 21, 2011 by busted

[Vwoodard]

I have never tried a box on the tippmann, and I am not quite getting what you are talking about. Do you have a way of taking a picture of it set up in operation?

Thanks,

Vince

I use a piece of 2x4 pine for corner stitching. Cut two 45 degree corners on the two inch side of the 2x4. Leave 1/2" between the 45 degree angles. The piece I use is 24 inches in length clamp it to the work bench or bolt it down and start sewing French corners

[Trox]

Here is the one for the 441, Interesting attachment. If anybody has experience of using this, please let us know. I saved this picture a long time ago, I do not remeber if it was sold by Artisan or Ferdco. It should not be to difficult making this from a block of aluminium if it is not available any more.

Thanks

Trox