Jump to content

Recommended Posts

Posted

Do you need a big industrial stapler to install these, or is it small (less expensive) hand held models available for sale. These sure look more professional than the rapid staples.

Thanks

Trox

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

  • Replies 36
  • Created
  • Last Reply

Top Posters In This Topic

  • Members
Posted

Would like to buy 40 but could use an installation reply................. :dunno:

If it ain't moving and should......WD40, If it's moving and shouldn't....Duct Tape. There you have it, now fix something

  • Members
Posted

Do you need a big industrial stapler to install these, or is it small (less expensive) hand held models available for sale. These sure look more professional than the rapid staples.

Thanks

Trox

Would like to buy 40 but could use an installation reply................. :dunno:

Sorry Bluesman, I didnt even see your post. I had to scroll up to figure out what you were talking about.

But you nailed it. I poke two holes with a stitching awl, stick the prongs through, and then use needlenose pliers to flatten/bend/smash the prongs down tight.

Thanks!

  • Members
Posted

thanks, just sent $10 for 60 plus shipping

Jon

If it ain't moving and should......WD40, If it's moving and shouldn't....Duct Tape. There you have it, now fix something

  • Members
Posted

Will send in a PM

If it ain't moving and should......WD40, If it's moving and shouldn't....Duct Tape. There you have it, now fix something

  • 4 weeks later...
  • Members
Posted

I have thousands of these things that came with my shop, they work great for belt loops and I use them on occasion as a bottom stop for zippers. I'd imagine there's a machine that installs them but I poke two holes and bend them with needle nose.

Posted

I am selling some solid brass belt loop staples. These are most commonly used to secure the ends of your belt keepers instead of sewing or using ordinary paper staples. Selling 20 pieces for 3 dollars, plus 1 dollar shipping no matter the quantity.

brassstaples.jpg

Thanks!

Hi, do you still have these for sale? could you ship some to Norway, I like to try them out please.

Tor

Tor

Workshop machines: TSC 441 clone/Efka DC1550, Dürkopp-Adler 267-373/Efka DC1600, Pfaff 345-H3/Cobra 600W, Singer 29K-72, Sandt 8 Ton clicking machine, Alpha SM skiving unit, Fortuna 620 band knife splitting machine. Old Irons: Adler 5-27, Adler 30-15, Singer 236W-100

Guest
This topic is now closed to further replies.

×
×
  • Create New...