Members NoName Posted March 5, 2012 Members Report Posted March 5, 2012 As promised, here are the pics of the vacuum table I made. It is approximately 12 inches square and has roughly 1500 holes 5/64 inch in diameter, drilled 1/4 inch apart. The wooden box is drilled to fit a 2 1/2 inch shop vac hose. In order to pull a good vacuum, cover the hot Kydex with a piece of cloth, then lay Saran Wrap over the whole thing to cover all the holes. Quote Diapers and Politicians should be changed often... Both for the same reason!
Members chancey77 Posted March 5, 2012 Members Report Posted March 5, 2012 Your wood skills are awesome! It is almost a shame to cover it up with the metal:) Have you thought about building a smaller one? And use 1/2" plexi and put in a light:) That is so sweet!!!!!! Great Table!!!! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.