Jump to content

Recommended Posts

So I have a issue on two pieces I just finished dying last night. I had wet them in the area around where I was stamping and they were dyed the leather is much lighter around where it had been wet. They had ample time to dry and I've never had this happen before on my other pieces done in the same way. It's so light and in a well defined area it looks like a bleach stain. Usually I do this and I never have problem with stains like this. Is this fixable? My only thought of recourse is to use a dauber and try to dye around the area that is lighter and blend it in.

Share this post


Link to post
Share on other sites

Did you only dampen the area you stamped? If so that might be the problem. Also stamped leather will absorb dye differently than non-stamped leather. Try casing the whole piece and when it is almost dry dye it again.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...