Jump to content

Recommended Posts

Hi guys my first project was an epic fail but I bit the bullet dyed the price but I'm really not happy is their anything I can use to strip the colour off and try again

Any advice welcome

Share this post


Link to post
Share on other sites

It depends on how you dyed it. I've used "liquid latex" before to completely pull ALL the dye off a piece before.....which is a shame because I was only trying to mask an area with it. But the results still stand.

If you've already sealed it, you can try some deglazer to remove the top coat...but it's a pretty harsh chemical. Work in a well ventilated area, and you'll need to re-condition the leather after using it.

Share this post


Link to post
Share on other sites

As a last resort, there is always Fiebings USMC Black. If you finished it, take the finish off with deglazer as stated above, then dye it black. If you haven't put a finish on, just dye it black.

Chief

Share this post


Link to post
Share on other sites

Yessir "Cheif" is right. Although if ye ole USMC Black doesn't cover it up there is basically no hope.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...