Jump to content
Talltales08

Molding/tooling Leather

Recommended Posts

Like most of you, I've seen some pretty awesome leather products on the net. A few of the things that I'm interested in making is leather armor, bracers and corsets. I'm a slave to intricate detail and would want to incorporate that to future projects once I get the basics down.

The question is: Do you do the tool work first then water harden/mold or after you have the leather in the shape you want?

Share this post


Link to post
Share on other sites

The short answer is Yes.

Some tooling can be done while the leather is un-molded. However, if you're going to use the cuir boulli techniques, it could easily 'erase' the tooling. Re-wetting a tooled piece can cause the depth of the tooling to decrease as the leather fibers swell from water. Simple things like carving lines or curves could be done before molding, but intricate details risk being wiped out.

If you have a piece that's going to be bent, then that will almost certainly distort the tooling.

It's all going to depend on how detailed the tooling will be. My experience in this is based on molding holsters and sheaths, so it isn't quite the same, but the principles are pretty close.

Share this post


Link to post
Share on other sites

I was thinking along those lines...it'll take awhile but I'll figure it out in time..thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...