Members hidenorhair Posted January 10, 2014 Members Report Posted January 10, 2014 Sorry for the thread resurrection but thought I'd share a simple way to keep the edge on these blades a bit longer. I know they're not massively expensive, but every little helps. I was using 2, sometimes 3 blades for every watch strap I was making, now I can get through a strap without changing the blade at all. Upon reading about stropping one day (straight razors) I came across a few people who have had success using newspaper. And believe it or not it actually works. I keep a couple of sheets on my desk when I'm working and every now and then just run the safety beveller the opposite direction up the newsprint a dozen or so times, turn the blade in the beveller to get the other side, then do the same thing. They keep their edge much longer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.