Members patches Posted January 21, 2013 Members Report Posted January 21, 2013 Hi, I have a Sutton Fenda crank leather splitter. My problem is that it tends to not split to a conistent thickness. It will get thinner as I go, sometimes. It is not consistent. Does anyone know of adjustments I need to make? Thanks Quote
Members fivesixthree Posted February 2, 2013 Members Report Posted February 2, 2013 I DONT OWN A SUTTON I HAVE A LANDIS , POSSIBLY THE SPRINGS OR SCREWS THAT ADJUST THE ROLLER IN THE BOTTOM ARE UNEVEN Quote
Members billymac814 Posted February 2, 2013 Members Report Posted February 2, 2013 I have a Landis too. If its out of adjustment it should split it consistently wrong I would think. Make sure that the split part is not wrapping around the roller and forcing the leather you're spitting up further which would make it thinner. I've had that happen on mine on occasion. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.