Members alpenabbq Posted February 21, 2013 Members Report Posted February 21, 2013 Looking for a tool or method for edging an oblong punched slot in 2 plys of 8-9 oz, I've tried using a machinist deburr tool (Vargus, Noga), works great on the straight, but tears the leather when going around the radius. Any help or suggestions would be appreiated Quote
Members JustKate Posted February 21, 2013 Members Report Posted February 21, 2013 There are punches made for that purpose: Oblong punches Quote My gallery My Facebook page My web site
gringobill Posted February 21, 2013 Report Posted February 21, 2013 Barry King makes an edger specifically for especially tight inside curves. It is a bissonet edger with a really tight curve. I use one for edging some punched slots. The bigger the slots the better it works, 3/4-1" in length. Quote
Members alpenabbq Posted February 21, 2013 Author Members Report Posted February 21, 2013 Thanks gringobill, I was not aware of this tool, I figured someone had figured out a solution. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.