Members WashingtonCross Posted March 25, 2013 Members Report Posted March 25, 2013 (edited) Hello there everyone. Complete and utter newbie here looking for some help on setting up the bobbin winder on my new Cobra 3 machine. My question is, how in the heck do you do it? I've been trying to look at some pics online and can't seem to figure it out. Thanks for your help! And please excuse my utter ignorance. Edited March 25, 2013 by WashingtonCross Quote
Members J Hayes Posted March 27, 2013 Members Report Posted March 27, 2013 I think its a table mounted winder. The wheel gets tipped or pushed forward making contact with the drive belt causing it to turn. It needs to be screwed to the table close enough to the belt to make contact when pushed forward and be clear of the belt when disengaged. As the bobbin fills a tab on the winder contacts the tread automatically disengaging it. I'll get you a few pictures of one I have. Jeremy Quote
Members WashingtonCross Posted March 27, 2013 Author Members Report Posted March 27, 2013 Awesome...thanks for your help! Quote
Members J Hayes Posted March 27, 2013 Members Report Posted March 27, 2013 Here's some pictures. You are welcome hope it helps. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.