Jump to content

Recommended Posts

  • Members
Posted

just finished my second little project, just doing basic wallets to practice, the stitching from the side I push the awl in looks ok (angle wise I mean, overall it still needs a lot of work, but that will come with practice, hopefully)

see below

dKXj4Lt.jpg

but on the back, there are stitches where they are not angled, looks a bit strange

Zw999Ra.jpg

heres a closeup

EOmVKeW.jpg

im getting quite a few on the back like this

now as I've just started I am dropping the needles quite a lot (trying to juggle the awl & 2 needles while avoiding stabbings is a challenge)

Could this be the reason ? I do try and always put the second needle under the first on the back, just wondering if me being clumsy is causing this or there is something else going on ?

  • Members
Posted

Have a look at Nigel Armitage's videos. The answer to all your woes are there :thumbsup:

Cheers

Zip

  • Members
Posted

Thanks,

Nigel's vids will be getting a lot more views shortly !

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...