shammatt Report post Posted September 3, 2013 I recently purchased an Acme 2C Horizontal Edge Sander. It runs a 2" to 3" x 60" belt. I'm sanding 18" long pieces of stitched two layers of 12oz. leather. My need is to quickly dress up each side of the layers to match. I also add a small radius to each corner. I have a power burnishing tool for further finishing, plus my edge coating. My question is two-fold: Any recommendation as to the grit of the sanding media (80?) and what type of sanding media (aluminum oxide, other?). Thanks! Quote Share this post Link to post Share on other sites
dirtclod Report post Posted September 3, 2013 I have a regular ole tablet belt sander. On it use 50 grit to get things where i want them then use a 180 grit, edge and then burnish. i use the aluminum oxide belts. Quote Share this post Link to post Share on other sites
