Chambri Report post Posted October 1, 2013 Would a size 1 beveler be suitable for beveling the edges of soft leather with a thickness of 1mm or less? I am just wondering at this thickness, the beveller might just drag the leather. A lot of demo videos I have seen online seem to use a slightly thicker and rigid leather as examples Thankyou. Quote Share this post Link to post Share on other sites
Cyberthrasher Report post Posted October 1, 2013 it might work, but for soft thin leathers (such as garment weight), it's usually better to do a rolled edge instead. Check out Kevin King's pinned topics on making wallets to show a good example. Another way to do it is just fold your piece over and glue it down, then stitch a liner over the back. Quote Share this post Link to post Share on other sites
Andrew Chee Report post Posted October 1, 2013 Size one beveler from whom? Using a small size Ron's tool beveler I can do leather that thin. Horse shoe brand ones won't. They're designed for thicker leather. With that said, neither will do soft leather. The leather will drag and look horrible. You really need relatively firm leather to be able to edge them. Skiving and turning is a good alternative. Andrew Quote Share this post Link to post Share on other sites
Chambri Report post Posted October 1, 2013 Thankyou for the reply. I'll check our Kevin King's pinned topics. Andrew, I did not realize quality can differ considerably between vendors. Quite a few people on the forums seem to swear by Ron's tools. Quote Share this post Link to post Share on other sites
Andrew Chee Report post Posted October 2, 2013 Rons edgers are very nice. I hear nice things about Barry king tools as well but have never used them. Horse shoe brand are also very nice but they're designed for saddle work and the toes are long enough that they interfere when you try to edge thing leathers. Andrew Quote Share this post Link to post Share on other sites
