Members Kowboyboots Posted October 16, 2008 Members Report Posted October 16, 2008 Here is a couple pictures of what I mostly do with leather. The horses are laser engraved into the hair on hide, lines around the edges are also lasered. The bread box is all hair on hide but the canisters are hair on just front & top, smooth sides & back. I use old bread boxes & canisters I pick up at yard sales, etc. Recycle-GO GREEN! Quote
JohnBarton Posted October 16, 2008 Report Posted October 16, 2008 That's pretty cool. Especially the way the horses seem to running through the grass on the breadbox. The laser is a neat tool that can be used to come up with some very artistic work. We use the laser all the time to cut parts and also to lay down patterns. Here is a case we just finished where I designed the name in Corel Draw and then lasered etched it very lightly on the piece for Zhen Hai, our carver to work his magic on Quote
Members Xothique Posted October 16, 2008 Members Report Posted October 16, 2008 Recycle - absolutely - and leatherwork is the perfect medium for doing this. Your boxes are really lovely, and now I'm intrigued about the laser. Can you buy equipment to do this at home, or do you take your designs to a firm to have them applied to the leather? Quote
Members Yeller Posted October 16, 2008 Members Report Posted October 16, 2008 Looks Beautiful... Can you smell the hair burning as the laser does its thing.... Ken Quote
Members Kowboyboots Posted October 16, 2008 Author Members Report Posted October 16, 2008 LOL, I come from a working cattle ranch, so the smell is nothing to me, just smells like branding time! The laser's are available for around $10,000, cheaper if you get a foreign model but I don't know the quality of them. If you buy used make sure to check out the amount of Co2 left in it. Watch them work at Laser Working I love my laser, couldn't live with out it, even for my own craft projects. i put a small pumkin in the rotary attachment the other, wow did that turn out neat and smelled so much better then the hair, LOL Quote
Members Xothique Posted October 16, 2008 Members Report Posted October 16, 2008 Now that's one smart piece of equipment. I can see loads of uses for one. A little out of my price range for the moment though... Laser pumpkin carving LOL, I love it! Quote
Members KandB Posted September 14, 2013 Members Report Posted September 14, 2013 Full Spectrum sells lasers for around $2k. I'm contemplating buying one - since I've been renting use on them for the last little while. Quote
Members Studio-N Posted September 15, 2013 Members Report Posted September 15, 2013 nice work. Is there anything special you needed to do to clean the carbon after it is burned? Quote
Members Andrew Chee Posted September 15, 2013 Members Report Posted September 15, 2013 When you etch onto the hair on sides, does it burn the hair off or does it just darken the hair? Couldn't really tell in the pictures. Also, for the pieces where you etch the edge lines, do you cut the pieces by hand or do you cut them with a laser? Andrew Quote
Members geckostraps Posted November 1, 2013 Members Report Posted November 1, 2013 Is there anyone out there that does laser work? I have a design I would like etched in leather for a guitar strap. Any ideas of a ballpark figure $$$ ? Quote
Members Studio-N Posted November 1, 2013 Members Report Posted November 1, 2013 well you've inspired me to try lasering the hair-on wallets. Here are the results. Looks like there is less detail available on the figures to use, but these types of open silhouettes definately worked well. I just have to find some more. Keep up the good work. -Nick http://www.lasered-stamps.com Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.