Sxxx1 Report post Posted July 11, 2014 Greetings, first post here! I just picked up a Krebs type splitter that is missing the hold down roller. Has any one an idea of what the diameter and length is of roller that is missing? I will need to make one and would prefer to do it once rather than 'feel' my way to the correct diameter. With the adjustment available fore/aft of the cutter blade and the up/down roller, which I presume is to accommodate sharpening and wear, I would think it's not a hyper-critical diameter.... but it would be nice to start at the right dimension! The pin axles are present and have a .213" diameter which seems odd, but considering the age, and with another hobby of restoring 100-150 year old shotguns, weird dimensions don't surprise me! I appreciate the help, thanks. Quote Share this post Link to post Share on other sites
bruce johnson Report post Posted July 11, 2014 I checked some here and all were right at 8-1/2" long and diameter varied slightly between 1/2" to a scant 9/16". Quote Share this post Link to post Share on other sites
Sxxx1 Report post Posted July 11, 2014 Thanks much for the info, now it can be put in to working order. Quote Share this post Link to post Share on other sites
