Members gumdrop Posted October 19, 2014 Members Report Posted October 19, 2014 Biting off more than I can chew, I decided to make a belt hung camera case. It is a vertical case with a "U" slot in the front, just somewhere to "put the camera down safely" it will normally be covered by a jacket so the non retracting lense can protrude through the slot. I thought it was a good original idea but they have been produced to fit the Leica camera already. First problem, I have never made anything in leather! so do not really know where to start any tips or suggestions please? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.