Members punitor1 Posted November 28, 2014 Members Report Posted November 28, 2014 Hello, I am looking to buy a splitter for latigo whip plaiting and general splitting with low production volume (3-5 whips per week). What spliter does everyone recommend? I have been thinking a landis 5 in 1 or similar would work well for my shop but is it accurate enough? I see the most plaiters use the C.S. Osborn manual type, why is this? Thanks, Travis Quote
Moderator bruce johnson Posted November 28, 2014 Moderator Report Posted November 28, 2014 Most but not all 5 in 1s can be set for level splitting but you'll wear your arm out cranking it through. The adjustments are not as precise. The CS Osborne #86 splitters see a lot of use because they are pretty available and tend to be the least expensive pull splitter. Easy to adjust, don't take up much room, and normally a solid unit. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.