dave85 Report post Posted April 18, 2015 (edited) hellofirst of all im new here and im from germany so my english isnt so good..i hope you guys can understand me..i just got me a pfaff 145.i cleaned and oiled the whole machine.its workin very good now,but im not sure if its working like its supposed to work...there are two things im not sure about...1.the middle foot always pulls the material (1mm) to the back before it pulls it forwards...i made little cliphttps://www.youtube.com/embed/IOTqViOSdbk2the handwheel always goes a little harder as usual when the outer foot starts to lift? is this normal? because on my adler 30-1 it almost feels the same... i think its because of the tension from the presser foot but im not sure.. i want to make sure im right greets Edited April 18, 2015 by dave85 Quote Share this post Link to post Share on other sites
cdurkinz Report post Posted April 21, 2015 Hey there! Your english is great just so you know. As for your questions, on my Pfaff 145 H4, the middle foot does not push the material forward before pushing it back like yours does. Are you sure those are the correct feet for a Pfaff 145? It almost seems like it could be a little too long. Does your hand wheel spin easier if you lightly press on your pedal by any chance? I have had a similar problem in the past, though I don't know if it's the same thing you're experiencing... Quote Share this post Link to post Share on other sites
