DianeWood Report post Posted November 7, 2015 Has anyone used Tandy embossing rolls with a bunkhouse embosser machine? Quote Share this post Link to post Share on other sites
Studio-N Report post Posted November 7, 2015 While I have not used them on the Bunkhouse machine, I've done the reverse. They both use a 1" bore so I see no reason while it should not work. It would probably just need a bit more pressure to make sure the roll comes in contact with the leather. The reverse is not always true because bunkhouse uses a larger Outer diameter on their rolls that what the Tandy machine will support. On a couple of rolls that were a smaller OD, they worked just fine. Cheers! Quote Share this post Link to post Share on other sites
DianeWood Report post Posted November 7, 2015 Ok thank you! You think the tandy rolls will fit on the bunkhouse machine i just need to adjust the amount of pressure against the leather? I recently orderd a bunkhouse machine and still waiting for it to get shipped to me but Im wanting to use a older tandy wheel if i can find anybody that has it, if it will work ok. Quote Share this post Link to post Share on other sites
Studio-N Report post Posted November 8, 2015 I believe they will work. At the very least, Tandy has a no question return policy, so if they don't you're not out anything but postage. Quote Share this post Link to post Share on other sites
DianeWood Report post Posted November 9, 2015 Ok thank you! Quote Share this post Link to post Share on other sites
