jdm0515 Report post Posted February 13, 2016 In my last order from Abbey England, I decided to add a few of the really cheap ($3-$4 or something) awl blades, as I was paying for shipping anyways. I thought it was a great deal when they came very sharp, just a quick polish and ready to use. That was until I used this guy for stitching a buckle on a belt through two layers of thick belt leather: Oh well, lesson learned. Does anyone have a recommendation for fixing this? Or maybe where I can source some reasonably priced hardened blades? Quote Share this post Link to post Share on other sites
zuludog Report post Posted February 13, 2016 In my last order from Abbey England, I decided to add a few of the really cheap ($3-$4 or something) awl blades, as I was paying for shipping anyways. I thought it was a great deal when they came very sharp, just a quick polish and ready to use. That was until I used this guy for stitching a buckle on a belt through two layers of thick belt leather: Oh well, lesson learned. Does anyone have a recommendation for fixing this? Or maybe where I can source some reasonably priced hardened blades? don't you think it would have been a bit more helpful to give us a few more details - like which country you're in for a start Quote Share this post Link to post Share on other sites
penguineer Report post Posted February 14, 2016 That point looks too "pointy" to me. Try reshaping the tip to a "bayonet point". The cutting edge at the end is wider, more strength, you don't have to push the awl as far through to make the same size hole and you end up with less of the awl in your finger. Cheers! Quote Share this post Link to post Share on other sites
zuludog Report post Posted February 14, 2016 (edited) Yes, I must admit it didn't ocurr to me, but it's quite obvious now you've mentioned it. The blade doesn't look like it has been properly shaped/sharpened/prepared. The tip of the awl should be a very small, rounded chisel shape. And as has been mentioned before on this forum, sharp enough so that it goes about halfway through your finger before you notice. You can find that in any decent leathercraft book, or search YouTube for 'sharpening an awl'. It needs more than 'just a quick polish'. Edited February 14, 2016 by zuludog Quote Share this post Link to post Share on other sites
jdm0515 Report post Posted February 14, 2016 I guess i'll clarify a few things here. I'm from Calgary, Alberta, Canada, so getting anything shipped from the US is super expensive for some reason, plus our dollar is terrible right now so the conversion kills me. Secondly, that is a side angle view, its not actually that pointy at the tip, but definitely still came tapered to a fine point. I learned to sharpen from Nigel Armitage's video, and I just assumed that's how a sharpened awl looks, so I just polished it and went. Quote Share this post Link to post Share on other sites
penguineer Report post Posted February 14, 2016 I have a photo or two of the comparison. I'll have to find it though. The reshaping and polishing takes a little time but I just relax in front of the tele and go by feel. The result is worth it.... Cheers! Quote Share this post Link to post Share on other sites
penguineer Report post Posted February 14, 2016 (edited) http://s628.photobucket.com/user/penguineer/media/leatherwork/tools/leather-tools-awl-points-800.jpg.html The one on the left is the original profile. Look at the width across the blade - you have to push more of the original blade through the leather to get the same size hole as the one on the right. The one on the left I think has a tendency to "rush" through the leather so it goes too far(more effort to pull back) and has more of the blade exposed on the back/hidden side, which could lead to cuts, stabs and messy bloodstains. I've used the awl on the right on jobs up to about 15mm thick(5/8"?)...... (Sorry about the link - seem to be having an issue with hosted pics......ill see what i can do....) Cheers! Edited February 14, 2016 by penguineer Quote Share this post Link to post Share on other sites
zuludog Report post Posted February 14, 2016 Have a look at this video on Youtube. He shows very clearly that he cuts off the point at the very tip of the awl blade to obtain the desired shape How to Sharpen a Leather Awl:Dixon Diamond Awl. Part 1 of 2 by Leathertoolz Quote Share this post Link to post Share on other sites
penguineer Report post Posted February 14, 2016 (edited) Looks like I messed up the image URL in the post above......this is the piccie.... Edited February 14, 2016 by penguineer Quote Share this post Link to post Share on other sites
Wicked Welts Report post Posted February 16, 2016 I appreciate your sharing of that image, that's an excellent comparison right there! Quote Share this post Link to post Share on other sites
penguineer Report post Posted February 17, 2016 I appreciate your sharing of that image, that's an excellent comparison right there! Thanks! One other thing that is noticeable in the comparison is that the tip of the blade is now in a thicker/wider/stronger section, so the awl should withstand bending when used on harder/thicker leather. Cheers! Quote Share this post Link to post Share on other sites
