HC009 Report post Posted July 6, 2016 Hi, I don't if anyone can help me I am really stuck. I am trying to sew 2 pieces of 2mm thick clear pvc sheet together by glueing a backing strip between the 2 together edges and then sewing near the dividing line on either side of the join. The pictures below show what I could be doing but I do not want to hand stitch as it takes ages I want to machine stitch the pieces close together. The problem is this is fine if the 2 pieces are straight lines like in the pictures below but these pieces are for a corset shapes with curves so when I put the backing strip of pvc on the back it is difficult to line up the edges because of the curve. Does anybody have any ideas of how I can do this so that it's easier as I do not want to cross stitch or hand stitch just use my 45k89 singer? Quote Share this post Link to post Share on other sites
HC009 Report post Posted July 6, 2016 I have figured out how to do it now - just glue it then sew works fine! Quote Share this post Link to post Share on other sites
