Tryggr Report post Posted April 18, 2017 Hello all. I've been reading s lot in here for advice and help but I have finally reached a topic that I am having not only a hard time with but also a hard time finding tips for success. I am sewing Velcro to some layered saddle skirting (~1/2 total thickness) and the hook side is giving me hell. I can't seem to get my machine to sew a proper stitch without the hook grabbing the thread and either breaking it or keeping the stitch from pulling taunt. I am using a techsew 3650hd with 277 thread and a 45x230(26) needle. Currently my stitch is set to the widest it will go. And the Velcro I am using is non-sticky back sew on. Any help or advice you all may have would be greatly appreciated. Quote Share this post Link to post Share on other sites
