Members ZigZag Posted April 2, 2018 Author Members Report Posted April 2, 2018 Thank you both Bob & Uwe for you advice, I’m back to work tomorrow so will have to wait to put your thoughts into practice. Much appreciated. Hold tight, response coming soon. Nick Quote Typical TSC441, Juki 1508, Singer 201, Singer 29k, Sailrite LSZ, Pfaff 238, Pfaff 335, Adler 98, Adler 166
Members ZigZag Posted April 3, 2018 Author Members Report Posted April 3, 2018 Hurrah! Success. Uwe & Cowboy Bob, thank you so much for sharing your knowledge and experience. Uwe, your video was a huge help and you were right, the bolt on the inside end of the bar wasn’t very tight. Also your visual guide of the arm being fully in or out at tdc/tbc was perfect for figuring it out. I did loosen the collar with the cam as it was slightly out. But so easy to get right with you help. All back together and working better than ever. The sewing machine doctor does it again. Nick Quote Typical TSC441, Juki 1508, Singer 201, Singer 29k, Sailrite LSZ, Pfaff 238, Pfaff 335, Adler 98, Adler 166
Members Romana Posted 10 hours ago Members Report Posted 10 hours ago Uwe, thank you thank you thank you!!! I have a Dison 335 A, a clone of the Pfaff 335 and I have been searching the internet for about a week now how to set the walking foot correctly. I finally understood it from your video and the setting is done! Thank you again and greetings from the Czech Republic ❤️ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.