Looking for binder attachment for yamata fy335

[leathim]

On 3/27/2019 at 11:43 PM, nylonRigging said:

Years of seam binding ( flat beds ) , but it same with both Flat or Cylinder,  and with trying to get the binders Throat right in there tight in the sweet spot .
With ' all ' binding attachments I have ever used . I have always had to cut/notch the presser foot for getting the proper distance to the binders throat . cutting and shaping, Getting into seam binders you will get good at this pretty quick.
Also don't screw around with strait binders . Just get to it, with nice R-angle 90 Deg. attachment .

edit to add:
Is that 'Yamata' A ( 135x17 Needle ?  ) . Also let me know how it goes with that 335 copy . I got a complete table setup from an old cylinder bed head that I sold and it begging for something to bolt down on it . That Yamata will be a GTG .
.

Is the table still available?

 

On 3/27/2019 at 11:43 PM, nylonRigging said:

Years of seam binding ( flat beds ) , but it same with both Flat or Cylinder,  and with trying to get the binders Throat right in there tight in the sweet spot .
With ' all ' binding attachments I have ever used . I have always had to cut/notch the presser foot for getting the proper distance to the binders throat . cutting and shaping, Getting into seam binders you will get good at this pretty quick.
Also don't screw around with strait binders . Just get to it, with nice R-angle 90 Deg. attachment .

edit to add:
Is that 'Yamata' A ( 135x17 Needle ?  ) . Also let me know how it goes with that 335 copy . I got a complete table setup from an old cylinder bed head that I sold and it begging for something to bolt down on it . That Yamata will be a GTG .
.

is this table still available?

 

[leathim]

On 3/27/2019 at 11:43 PM, nylonRigging said:

Years of seam binding ( flat beds ) , but it same with both Flat or Cylinder,  and with trying to get the binders Throat right in there tight in the sweet spot .
With ' all ' binding attachments I have ever used . I have always had to cut/notch the presser foot for getting the proper distance to the binders throat . cutting and shaping, Getting into seam binders you will get good at this pretty quick.
Also don't screw around with strait binders . Just get to it, with nice R-angle 90 Deg. attachment .

edit to add:
Is that 'Yamata' A ( 135x17 Needle ?  ) . Also let me know how it goes with that 335 copy . I got a complete table setup from an old cylinder bed head that I sold and it begging for something to bolt down on it . That Yamata will be a GTG .
.

Is the table still available?

 

On 3/27/2019 at 11:43 PM, nylonRigging said:

Years of seam binding ( flat beds ) , but it same with both Flat or Cylinder,  and with trying to get the binders Throat right in there tight in the sweet spot .
With ' all ' binding attachments I have ever used . I have always had to cut/notch the presser foot for getting the proper distance to the binders throat . cutting and shaping, Getting into seam binders you will get good at this pretty quick.
Also don't screw around with strait binders . Just get to it, with nice R-angle 90 Deg. attachment .

edit to add:
Is that 'Yamata' A ( 135x17 Needle ?  ) . Also let me know how it goes with that 335 copy . I got a complete table setup from an old cylinder bed head that I sold and it begging for something to bolt down on it . That Yamata will be a GTG .
.

is this table still available?