Jump to content

Arbor press machined for Tandy dies

Recommended Posts

This is a Harbor Freight Arbor press modified by a professional machine shop to accept Tandy dies. The ram and anvil were drilled out to accept Tandy dies, and a thumb screw was added to the ram to lock the top die in place. The anvil is spot welded (no longer turns) to hold proper alignment for the dies. In addition, it works incredibly well for 3D stamps, letter stamps, etc. I will include a metal plate you can place over the anvil for doing 3D stamping. I would put the leather on the metal plate, position the stamp, then put the plate on the anvil to stamp. With packaging shipping weight will be around 40Lbs. Price will be $100 + shipping costs. Shipping costs will be roughly $25 for 5-7 days USPS or USPS Priority Mail is 2-3 days and would cost around $40. Will only ship to the United States. Message me with any questions. Thanks!

arbor press-compressed.pdf

arbor with dies-compressed.pdf

arbor press ram-compressed.pdf

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...