Members vincentmakes Posted January 1, 2020 Members Report Posted January 1, 2020 Hi everyone, I just wanted to share some details on a DIY version of a hot foil stamping device I made. It's very cheap (~80$) and I got good results on smooth leather. It consists of a drill guide, a branding iron, a PID and a thermocouple. Here's an example The drill guide with the iron and the thermocouple is attached with a metal strap The PID and the solid state relay in an enclosure More details here:https://hackaday.io/project/168533-hot-foil-leather-stamping-and-electric-creaser Hope this can be helpful ! Quote
Members DustyB Posted February 10, 2020 Members Report Posted February 10, 2020 Thanks a bunch .... Going to try Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.