vincentmakes Report post Posted January 1, 2020 Hi everyone, I just wanted to share some details on a DIY version of a hot foil stamping device I made. It's very cheap (~80$) and I got good results on smooth leather. It consists of a drill guide, a branding iron, a PID and a thermocouple. Here's an example The drill guide with the iron and the thermocouple is attached with a metal strap The PID and the solid state relay in an enclosure More details here:https://hackaday.io/project/168533-hot-foil-leather-stamping-and-electric-creaser Hope this can be helpful ! Quote Share this post Link to post Share on other sites
DustyB Report post Posted February 10, 2020 Thanks a bunch .... Going to try Quote Share this post Link to post Share on other sites