Jump to content
RickV

Help Needed

Recommended Posts

I would just like to thank everyone for their advice.  I found out multiple things about this machine recently.  I found out that my old Mechanic was cutting corners. It turns out that the Tension release pin was worn down and now engaging, which is how i found out that instead of ordering the pin and replacing it the mechanic used a broken needle to "fix" the problem.  I also found out that the sewist that was using this machine was not doing proper preventative maintenance.  I removed the fly wheel to find out that the shaft had burned and blued. warping it pretty badly.  I have no other option but to send it to the shop to replace the shaft and have the mechanics there give the whole machine the once over. The condition that the machine was in would have tore itself apart in 6-12 months if we hadn't found out about the shaft damage.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...