bisonmade Report post Posted September 11, 2013 I have 9 shells available. Each are grade #2. They are uncut and perfect as from the tannery. $175 each. Share this post Link to post Share on other sites
Greystone Report post Posted September 11, 2013 Size? What cut are they? I'm, not sure by your description, shoulder back butt? Share this post Link to post Share on other sites
Andrew Chee Report post Posted September 11, 2013 What's the thicknesses you have in the shells? Andrew Share this post Link to post Share on other sites
bisonmade Report post Posted September 11, 2013 These are Color #8 which is the standard/classic Maroon cordovan color. The thickness is around 4oz. Best Regards, Sebastian Share this post Link to post Share on other sites
Andrew Chee Report post Posted September 11, 2013 Greystone, just FYI, there is no "cut" for shell cordovan. They are all the same cut. They are ovals cut from the buttcheeks of a horse. The grades refer to to the usable size of the shells. Andrew Share this post Link to post Share on other sites
Andrew Chee Report post Posted September 11, 2013 Sent a PM. Share this post Link to post Share on other sites
Greystone Report post Posted September 11, 2013 (edited) Thanks for clarification of terms .. BUTT,,, does "The grades refer to to the usable size of the shells." if grade 2 does that translate to 2 sq ft Sorry for the Q's better asked than not happy with the end results Again thanks David Edited September 11, 2013 by Greystone Share this post Link to post Share on other sites
Andrew Chee Report post Posted September 11, 2013 (edited) No, grades do not work like that. Horween has a strange grading system for their shells: Grade #1: 2.75 SF Grade X: 2.25 SF Grade #2: 1.75 SF Grade #3: 1.50 SF Grade #4: 1.25 SF Grade #5: 1.00 SF Chips: 1 SF and under They do not sell their shells by the square feet. The larger the shells, the more expensive they are (when calculated by square footage). I guess it makes sense since the larger shells are more rare then the smaller ones. Andrew Edited September 11, 2013 by Andrew Chee Share this post Link to post Share on other sites
SteelheadFineGoods Report post Posted October 1, 2013 PM sent. Hoping to grab a few from you if they haven't been snatched up yet. Share this post Link to post Share on other sites
FStyles Report post Posted October 10, 2013 Couple PMs sent. Would live to grab some! Share this post Link to post Share on other sites
ohpaulpleasestop Report post Posted October 11, 2013 Are there any more left? Thanks Paul Share this post Link to post Share on other sites
SteelheadFineGoods Report post Posted November 4, 2013 Has anybody gotten a response from bisonmade? I'm hoping to grab some shells but have not gotten a response yet. Share this post Link to post Share on other sites
EricIsaiah Report post Posted November 6, 2013 No luck. I assume it's all gone as this stuff is hotter than hot right now. Share this post Link to post Share on other sites
