rundogdave Report post Posted February 28, 2015 I'm trying to make a double mag holder with closures for the mags, but I was trying to avoid a pancake style. How would one sew a belt loop on the back after having sewed the molded front on the back, or visa versa? Kinda scratching my head on this one. Thanks for any advice. Quote Share this post Link to post Share on other sites
camano ridge Report post Posted February 28, 2015 I would sew the loop onto the back piece then stitch on the molded front piece. Are you hand stitching or machine stitching. I your concern is sewing the center seam between the two mg pouches. I would recommend two belt loops one centered behind each mag pouch. This will allow the double mag pouch to bend slightly on the belt and mold better to the body. Stitch both loop on the back first then stitch the molded front on. Quote Share this post Link to post Share on other sites
rundogdave Report post Posted February 28, 2015 Brilliant!! I had not thought of 2 belt loops. Hand stitching, so that should work well. Thanks. Quote Share this post Link to post Share on other sites