esantoro Report post Posted April 27, 2008 I may be soon purchasing an anvil from Harbor Freight, and will also need to get an oil can to make it easier to oil certain parts of my 441 stitcher. Does this seem like a good oil can to get? http://www.harborfreight.com/cpi/ctaf/disp...temnumber=36629 Ed Quote Share this post Link to post Share on other sites
Art Report post Posted April 28, 2008 Hi Ed, I have 3 of them, they are pretty good, most times you have to turn them upside down to prime them the first time, after that they work fine, after you get one going you can squirt some oil down the spout before screwing it on to prime it and lube the seals. I paid $1.99 apiece on sale. I still like my little engineer oil cans, they squirt a smaller amount and the long thin spouted ones make oiling the lower rod and crank bearings easier. Art I may be soon purchasing an anvil from Harbor Freight, and will also need to get an oil can to make it easier to oil certain parts of my 441 stitcher.Does this seem like a good oil can to get? http://www.harborfreight.com/cpi/ctaf/disp...temnumber=36629 Ed Quote Share this post Link to post Share on other sites
