icdux1 Report post Posted June 25, 2008 (edited) have a request for a remington 1875 holster, you gun nuts{like me} will recall that this model has the steel "web" under the bbl. i am thinking the pattern from a 58 rem cap & ball revolver should work. does anybody know for sure?? anybody made one of these?? thanks for any advise. dux Edited June 25, 2008 by icdux1 Quote Share this post Link to post Share on other sites
Art Report post Posted June 25, 2008 Hi Dux, Pretty sure it will. The holsters for the 58 rem or the Ruger Old Army are close enough, you want to design something that it will ride "deep" in. If you try to make a "high riding" or "gunfighter" holster where the TG is exposed, the 5 1/2" ones will tend to come out of the holster on their own (at the darnedest time) because they cam around that webbing under the bbl. The 7 1/2" bbl models are a little better in that respect but still a little loose. Of course if it is for gunfighting, this is what you want. Art have a request for a remington 1875 holster, you gun nuts{like me} will recall that this model has the steel "web" under the bbl. i am thinking the pattern from a 58 rem cap & ball revolver should work. does anybody know for sure?? anybody made one of these?? thanks for any advise. dux Quote Share this post Link to post Share on other sites
icdux1 Report post Posted June 26, 2008 hey art, thanks for the imput. gun has the 7.5 bbl so hopefully it wont pop out. thanks again. dux Quote Share this post Link to post Share on other sites
