If you get two or more leatherworkers together, there will probably be three or more opinions on the best stamping tools. Opinions about who made or still makes the best tools are like mothers, everybody has one. It is hard to pay homage to all the toolmakers that have come and gone, but I'll try and list some of them.
Various saddlemakers. These were custom made tools, often from a nail or if necessary from a piece of tool steel. Almost NEVER signed and seldom marked with anything, they non
Snaps are a device to hold two of something together temporarily as a finished product. Snaps usually come in four sizes.
Ligne 24, Line 24, Durable Dot, or 15mm Snaps are about 19/32 or 5/8 inch. They come in many makeup and finishes and platings and are made by a lot of different onshore and offshore companies for different applications. They can be obtained in various cost configurations to suit the quality and purpose of the end product. These come with various names usually incorporati
This is my first blog. I am doing this on request, so I hope I like it. Let me say first and very important that opinions, evaluations, methods, procedures, and anything else in this blog are merely opinions, my humble opinions. I am not responsible for information contained in these ramblings and claim no responsibility for anything in this blog, however accurate or inaccurate it may be. You pay nothing for this blog, and you may assume that nothing is what you are getting. This is a legal
