Hello Everyone,
I'm new here and new to my machine. I have a pfaff 335 machine I picked up. I bought it to do hockey glove palms and a few other things. It's a 335-H3-17/18 with an "L" below that.
The machine works well, but the previous owner ground up the presser feet and throat plate. Which makes it a bit difficult to get the material to flow well. So I ordered some from aliexpress.
The presser feet were a bit tall, but I found a video on here that I think will help me adjust the height of the presser foot shaft (It's German so I'm guessing).
However, the feed dog and presser plate seem to be a bit off. I'd need to shift the needle to the right a smidge. so that it enters the hold properly. I also assume I would need to adjust the timing and rotary hook, but I know how to do that.
My question is, can I move the shaft left to right? And if so, how do I do that?
