T Moore Medicine Hat Saddlery
-
Content Count
152 -
Joined
-
Last visited
Posts posted by T Moore Medicine Hat Saddlery
-
-
Just let me know here if you would like something
-
Wondering what the general feelings are abut the campbell /randall needle and awl stitches for sadales and tack manufacture. Been looking at one a long Time but just haven't pulled the trigger. Sewed on one many years ago but don't remember much about them .
-
-
Have pretty much tried everything. I've never seen this problem exactly like this. I've tried just about everything. I heard saddlers one step cleaner and conditioner might do it. I am about to the point of calling it good and sending it back like it is
-
How would you attempt to soften up a super dry hard leather on a saddle. The regular meats foot and lexol seems to be having no effect. Never seen this before. Any suggestions ?
-
I have 2 or 3 left
-
Thanks guys
-
-
Has anyone built or even seen work saddles built out of harness leather instead of skirting ? I saw a couple years ago when I was working with Carl Darr. I've often wondered how they held up over the years. At the time they were used hard and we're pretty rough and we're old but I've never seen another one
-
Has anyone ever built a saddle with harness leather instead of skirting leather. I saw a couple many years ago when i was working for Carl Darr but don't remember much about them . I was wondering how they hold up under hard use ? Stretch compared to skirting ,durability.
-
Ive seen a lot written about inskirt rigging and it's strengths and weaknesses but noting about how to build a sure enough bullet proof inskirt rigging.About all that is ever said is its good "if put in properly" but nothing really said about exactly what is put in properly. I've seen some supposedly strong inskirt rigs that were anything but strong. Sure they give close contact but actually strong what I've seen were far from it. Close contact strong and lightweight seem to not go together. Hopefully someone can shed a little light on how to make it strong and lightweight at the same time
-
I've seen a lot written about inskirt rigging and it's strengths and weaknesses but noting about how to build a sure enough bullet proof inskirt rigging.About all that is ever said is its good "if put in properly" but nothing really said about exactly what is put in properly. I've seen some supposedly strong inskirt rigs that were anything but strong. Sure they give close contact but actually strong what I've seen were far from it. Close contact strong and lightweight seem to not go together. Hopefully someone can shed a little light on how to make it strong and lightweight at the same time
-
What machine is best for sewing heavy canvas. I have the oportunity to build bedrolls and tarps for a feller but question the pearson #6 or landis#1 to do this light if sewing. Any ideas ?
-
Look for a landis #1. They can be adjusted to sew very well. People who disagree just don't know how to set them up. They are not quite up to the level of a pearson #6 but very close and can be bought for under $1000
-
Looking for a Landis #1 shuttle in VERY good shaoe. I am looking to get some made and need 1 for the machinist to use as a pattern .please contact me
-
Looking for a Landis #1 shuttle in VERY good condition.I am looking to get some made and need 1 to use as a pattern for the machinist to copy. If anyone has anything please contact me
-
I have a pearson #6 and a Landis #1. I like both machines equally well.They each have their strong points and their place in the shop. I was hoping we could get the wners and users of these fine machines together in one place to share tips and possibly a few parts from those who have extras
-
How many of these machines are in use today with leatherworkers. I used my Pearson #6 as a lone machine for everything until I got the Landis #1 now I'm using them both
-
If someone were to get new shuttles made for the Landis #1 how many people would be interested. Would there be enough demand to make it a fordable
-
-
Can' figure out how to post a picture. Says it' too big
-
Newest stitcher. Can' stitch here because I can' get the bobbin out of the shuttle. Need a thinner screwdriver Maybe have to make it. Machine is good and tight and the sample of sewing looks good. Pretty excited to get it going
-
What year would a Landis #1 serial # 7234 have been made . Looking for anything close and yes tge serial number is stamped on the machine frame
-
Looking for best place to get top quality linen thread
New hand forged leather knives
in Old/Sold
Posted · Report reply
My Facebook is M&M hand forged Custom knives